0

  Home Page | About Us | Product | Contact Us  
 
  Debugger Tools  
 
0

Asset LX-1000e for Intel Trace Port Analyzer

- 380 Mhz Accquisition rate for faster detection of software and firm- ware bugs.

- Works with multiple Intel Processor cores on both Microsoft Windows and Linux hosts.

0

Lauterbach Trace 32 ICD

- Supports more than 15 architectures including architectures like ARM & PowerPC.

- 32-Bit RISC controllers available.

 
   
 
0
  0 i-System iC5000
The iC5000 supports almost all 32-microcontrollers. By adding the IOM2 accessory, the iC5000 can be expanded to monitor digital and analog signals on your embedded hardware.
0   iSystem iC5700
Steady increase in multi-core and multi-processor, system-on-chip (SoC) processing platforms,
with the pace of integration being especially pronounced in the automotive industry
           
  i-System iC6000
Designed specifically to support the high-speed serial interfaces featured on advanced 32-bit microcontrollers.
0 i-System Analog Digital CAN2/LIN2
The CAN/CAN-FD and LIN bus network data can be captured and displayed in parallel to the microcontroller code execution domain
  0
           
  0 Infineon DAP/DAPE
Infineon DAP/DAPE  Active Probe enables the debugging, tracing and testing  of Infineon’s AURIX™ microcontroller  family.  It  supports  the  DAP debug  interface  operating  at  their maximum frequency. On 2nd generation AURIX devices it optionally also supports the DAPE interface.

0   Infineon MPC5x/SPC5x
MPC5x/SPC5x Aurora Active Probe enables the debugging, tracing and testing of NXP Qorivva (MPC5xxx) and ST SPC5 microcontroller families. Besides the JTAG debug interface it supports Aurora trace interface operating at its maximum frequency.
 
       
  Infineon AGBT
The iSYSTEM Active Probe has been developed to connect to the Aurora GigaBit Trace (AGBT) interface along the DAP debug interface at its maximum frequency.  Both, Infineon AurixTM TC2xx and TC3xx (2nd generation) microcontrollers are supported
0 Infineon ARM HSSTP
The Cortex™ families of processors continue to appear in increasingly complex system-on-chip (SoC) devices. In order to access the volume of trace information created by such products, ARM® has developed a new intellectual property (IP) block named High Speed Serial Trace Port (HSSTP).
  0

... find out more version Debugger  

 

 

 

 

 
  Compiler Tools  
 
  0

 

Tasking Software development tools set

- It is a Viper Compiler Technology by Altium.

- It is also support for Infineon Technologies.

 

 
   
0 0
  0

Green Hills Multi

- To support design & testing tools.

- Target operating systems.

0

Paradigm C++ PRO Real package

- It is a complete Integrated Development Environment for x86 real mode targets.

- 20-bit real mode address space (1MB)

 
  ... find out more version Compiler  
   
  Analyzer Tools  
 
0 0
   
  0

SerialTek BusXpert Micro II SAS/SATA revolutionizes the analysis of devices and systems utilizing the high speed SAS and SATA storage protocols

0

 IFTools MSB-RS232 

- Supports protocols with 9 data bits and any baudrate from 1 Baud to 1Mbaud.

- Display of real level changes RxD, TxD and available for Windows and Linux.

 
   
  0 0 0  
 

MCC MIIC-101 

- Hand-held or remote I2C Bus & SMBus monitoring instrument.

 

MCC MIIC-203 

- I2C Bus host adapter supports standard & fast bus speed, plus the I2C interrupt signal.

 

MCC MIIC-204 

- USB to I2C adapter with ASCII Fast Mode Interface supports standards & fast bus speed, plus the I2C inteerupt signal.

 
 

 

     
 
  0 0  
  0 0 0  
 

Total Phase Aardvark I2C/SPI Host Adapter 

- Fast & powerful I2C bus & SPI bus host adapter through USB.

 

Total Phase Beagle USB5000 

- SuperSpeed protocol analyzer provides real-time interactive capture & analysis of USB 3.0 & 2.0.

 

Ellisys USB Explorer 280 

- Multifuction USB3.0 & 2.0 Test System.

 
         
 

 

   
0   BusPro-I
The BusPro-I™ is an affordably priced powerful instrument designed to meet the needs of engineers tasked with debugging and troubleshooting
I2C bus circuitry. The BusPro-I can monitor and log I2C bus traffic in real-time, generate I2C transactions to communicate with components
on the bus, and perform in-system programming of I2C EEPROMs.
         

Cas 1000-12C/E
I2C bus analysis has never been easier with Corelis’ BusPro and CAS-1000 products. These fully featured
products provide monitor, debug, and programming capability. These instruments are perfect for
engineers who design, verify, and test circuits that incorporate an I2C bus.
  0
         
         
      .... find out more version Analyzer  
 
  Tester Tools  
 
0 0
 
  0  

 RPM Root2 USB

- Test hosts for manufacturing test, development & QA testing.

  0  

Softing CAN-AC-PCI Universal

-PCI board with on board microcontroller.

 
  ... find out more version Tester  
 
  Programmer Tools  
 
0 0
 
  0  

Dediprog SF600 

- "In system programming" programmer to update SPI Flash soldered on board or in the socket adapter.

  0  

EE Tools TopMax II 

- High speed universal device programmer for USB 2.0 PC-interface.

 
     
0 0
  0  

SMH FlashRunner Programmer 

- Standalone In-system programmer specific for Flash-based microcontrollers & serial memories

  0  

RPM MPQ-PSoc 

- Four port In-system programmer for Cypress PSoc

 
             
         
         
    Corelis-Bus Pro-S
- High-performance SPI controller with multi-IO interface.
- Four IO modes inclusing standard, 3 wire, dual and quad.
- Up to 200 Mb/s thoughput in enhanced mode for fast programming speed. - In system programming (ISP) of SPI serial flash and EEPROMs.
- High-speed USB 2.0 interface
-SPI Exerciser software works with Windows Vista, Windows 7, Windows 8/8.1 & Windows 10.


Corelis-Net USB 1149 1E
- High-performance JTAG controller with I2C and SPI interfaces.
- Concurrent (gang) testing and In-System Programming (ISP) on up to four UUTs for high volume test.
- Four TAP connections for UUT designs with multiple scan chains.
- Supports Windows® XP, Windows Vista®, Windows® 7, and Linux operating systems (32-bit and 64-bit).

 

 
               
    Corelis-USB 1149 1E
- High-performance JTAG controller with I2C and SPI interfaces.
- User programmable JTAG TCK rate up to 100 MHz, SPI SCK rate up to 50 MHz, and I2C SCL rate up to 5 MHz.
- Three general purpose I/O channels.
- High-speed bus-powered USB 2.0 interface ideal for the bench and desktop; no external power supply required.
- Scan Function Library software supports Windows® XP, Windows Vista®, and Windows® 7 operating systems (32-bit and 64-bit).
0 Corelis-USB 1149 4E
- High-performance multi-TAP JTAG controller with integrated I2C and SPI interfaces.
- User programmable JTAG TCK rate up to 100 MHz, SPI SCK rate up to 50 MHz, and I2C SCL rate up to 5 MHz.
- High-speed bus-powered USB 2.0 interface ideal for the bench and desktop; no external power supply required. Scan Function Library software supports Windows XP, Windows Vista, and Windows 7 operating systems (32-bit and 64-bit).
 

0

 
           
  ... find out more version Programmer  
  Item By Categories  
 
0 0 0 0 0
Debugger Compiler Analyzer Tester Programmer
  FEATURED BRAND  
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0  
     
     
  Coming Soon PRODUCT & BRAND......  
  .0 0    
         
     
 
www.flashtech.com.my
 
0 HQ : Flash Technologies Pivate Limited | No.61, Kaki Bukit Avenue 1#04-15 Shun Li Industrial Park Singapore 417943 | Tel : (65) 6749 6168 | Fax : (65) 6749 6138 | Email : sales_sg@flashtech.com.sg | Website : www.flashtech.com.sg
Branch (Malaysia) : Flash Embedded Tools Sdn Bhd | THE C.E.O 31-11-13, Lebuh Nipah 5, Bayan Lepas, 11950 Pulau Pinang, Malaysia | Tel : (604) 637 1113 | Fax : None | Email : sales@flashtech.com.my| Website : www.flashtech.com.my
 

Copyright © 2015-2019 Flash Embedded Tools Sdn Bhd | All right reserved | Term of services | Privacy Policy