Home Page | About Us | Product | Contact Us  
  Dediprog proposes a complete portfolio of programmers and accessories to provide you the best total solution. All programmers manufactured by Dediprog are designed to support all serial flash products from most of the serial flash makers including ST, SST, ATMEL, Winbond, NexFlash, PMC, Spansion, Macronix, and EON.  
... find out more about Dediprog    
  Product Detail As Below Link  
  0 DP1000 An automated Programming system
- With extra lightweight and compact compared to DP3000 as the size is 50% smaller.
- With the ProgMaster Universal Programmer embedded in DP1000 and various input/output peripherals, the system can provide an
overall solution for IC programming.
- Support all kinds of IC families such as SPI NAND/NOR FLASH, EEPROM, eMMC, MCU and more.
- The system is embedded in 2 sets of ProgMaster-U8 Programmer providing 16 programming sites which providing stable quality and
high throughput.

DP2000 An automated programming

- Automated programming system for tube/tape in and tape out
- The system is equipped with a moving programming module and 4 nozzles to handle pick and placement of IC input, positioning, programming and IC output
- With 4 nozzles functioning synchronously with the moving module, easily achieves high throughput 3,000 UPH

  DP3000 With the ProgMaster Universal Programmer embedded

-  Automated programming system with ProgMaster Universal Programmer Embedded and various input/output peripherals and system can provide on overall solution for IC programming
- It also supports to NAND/NOR FLASH, EEPROM and MCU... with offers in different input/output options of tube, tape and tray
- The system is able to be embedded in 6 sets of ProgMaster-U8 Programmer providing 48 programming sites


DP600-A /M1 / M2 Automatic / Manual Taping machine
- Mechanical Accuracy +/- 0.04mm
- PSA (Press sensitive adhesive) and heat sealing.
- Supported 22"input and output tape.
- Supported 8-88 mm width cover tape.



ProgMaster-U4 Equipped with 4 programming

- High speed programming USB2.0 with 480MB/S
- Support all kinds of EEPROM, MCU, SPI NOR/NAND Flash, Parallel NOR/NAND Flash, eMMC/eMCP, CPLD, FPGA and more
- Socket Adaptor of DIP, SOP, SSOP, TSOP, PLCC, QFN, BGA and more
- External Memory Card 64GB SD Card

0   ProgMaster-U8 A new generation universal gang programmer 

- Universal Gang Programmer with ultra high speed and it completely can support all IC families on the market
- Equipped with 8 programming sites
- Software supports NAND FLASH skip bad block and partition programming
- Able to perform stand alone programming when programming SPI/ NOR FLASH and eMMC
- Provide remora control API



  NuProg-E Engineering UFS/EMMC Programmer
- Speed processor to achieve high programming speed
(Write 50MB/s; Read speed 100MB/s)
- Timing reference : 1GB image file is programmed into Toshiba UFS IC in just 25 seconds.
0 NuProg-F8 UFS/eMMC Gang Programmer and Duplicator
- Supports UFS2.0 and UFS2.1 devices.
- Supports M-PHY 3.1 up to HS G2 Rate B single lane.
- Supports the latest eMMC version : 5.1.
- eMMC supports GPP, RPMB and Enhanced mode.
- PC connection via USB3.0 super speed or USB 2.0.
  0 0 0  
    EE100 "In System Programming"   SF100 "In circuit Programming"   SF600 "In System Programming"  
    High Speed “In System Programming "and “off line "programmer to update the EEPROM soldered on board or inserted in the socket for development, production or repairing in the field.   In circuit programming to update serial flash soldered on board or inserted in the socket of the Dediprog Backup Boot Flash tool by using the computer software through USB communication.   High Speed “In System” programming to update the SPI Flash soldered on board (In Circuit Programming) or in the socket adaptor (Off line programming).
• StarProg-F
Flash Engineering Programmer

• StarProg-U
Engineering Universal IC Programmer

- Support EEPROM, SPI NOR/NAND Flash, Parallel NOR/ NAND Flash, MCU, eMMC/eMCP, CPLD, FPGA & etc.
-Support DIP, SOP, SSOP, TSOP, PLCC, QFN, LQFP, BGA package & etc.
- It is a regular divice update with 1.8V low volage IC.
    StarProg-ATE Engineering Universal ICP/ISP Programmer
- Support EEPROM, SPI Flash, Microcontroller, CPLD, FPGA & etc.
- Support ISP protocol SPI, I2C, BDM, SWD, JTAG, UART, SWIM & etc
- Equipped ISP and ATE cable and is able to control voltage and frequency through the software for stablization.
-Support file formats Binary, Intel Hex, Motorola, ROM & etc.
  Item By Categories  
0 0 0 0 0
Debugger Compiler Analyzer Tester Programmer
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0
  Coming Soon PRODUCT & BRAND......  
  .0 0    
0 HQ : Flash Technologies Pivate Limited | No.61, Kaki Bukit Avenue 1#04-15 Shun Li Industrial Park Singapore 417943 | Tel : (65) 6749 6168 | Fax : (65) 6749 6138 | Email : sales_sg@flashtech.com.sg | Website : www.flashtech.com.sg
Branch (Malaysia) : Flash Embedded Tools Sdn Bhd | THE C.E.O 31-11-13, Lebuh Nipah 5, Bayan Lepas, 11950 Pulau Pinang, Malaysia | Tel : (604) 606 3699 | Fax : None | Email : sales@flashtech.com.my| Website : www.flashtech.com.my

Copyright © 2015-2024 Flash Embedded Tools Sdn Bhd | All right reserved | Term of services | Privacy Policy